Ipconfig syntax

Ipconfig

Displays all current TCP/IP network configuration values and refreshes Dynamic Host Configuration Protocol (DHCP) and Domain Name System (DNS) settings. When used without parameters, ipconfig displays the IP address, subnet mask, and default gateway for all adapters.

Syntax

ipconfig [/all] [/renew [Adapter]] [/release [Adapter]] [/flushdns] [/displaydns] [/registerdns] [/showclassid Adapter] [/setclassid Adapter [ClassID]]

Parameters

/all : Displays the full TCP/IP configuration for all adapters. Without this parameter, ipconfig displays only the IP address, subnet mask, and default gateway values for each adapter. Adapters can represent physical interfaces, such as installed network adapters, or logical interfaces, such as dial-up connections.

/flushdns : Flushes and resets the contents of the DNS client resolver cache. During DNS troubleshooting, you can use this procedure to discard negative cache entries from the cache, as well as any other entries that have been added dynamically.

/displaydns : Displays the contents of the DNS client resolver cache, which includes both entries preloaded from the local Hosts file and any recently obtained resource records for name queries resolved by the computer. The DNS Client service uses this information to resolve frequently queried names quickly, before querying its configured DNS servers.

/registerdns : Initiates manual dynamic registration for the DNS names and IP addresses that are configured at a computer. You can use this parameter to troubleshoot a failed DNS name registration or resolve a dynamic update problem between a client and the DNS server without rebooting the client computer. The DNS settings in the advanced properties of the TCP/IP protocol determine which names are registered in DNS.

/?: Displays help at the command prompt.

Examples

To display the basic TCP/IP configuration for all adapters, type:

ipconfig

To display the full TCP/IP configuration for all adapters, type:

ipconfig /all

To renew a DHCP-assigned IP address configuration for only the Local Area Connection adapter, type:

ipconfig /renew "Local Area Connection"

To flush the DNS resolver cache when troubleshooting DNS name resolution problems, type:

ipconfig /flushdns